Precision CNC Machining Services for Custom Parts
Send a STEP file and get a DFM-reviewed quote within one business day. 5-axis milling, Swiss turning, finishing and inspection run under one roof — and every batch ships held to ±0.01 mm.
9001
ISO 9001:2015
Quality management across quoting, machining, inspection and dispatch.
13485
ISO 13485:2016
Medical device manufacturing control, from material traceability to cleaning.
9100D
AS9100D
Aerospace quality system with documented first-article and change control.
Scope statements, certificates and inspection records are available on request — see quality assurance.
One shop. Every route your part needs.
Machining, turning, prototyping and finishing are planned together, so the geometry, the material and the stage of your project decide the process — not the other way round.
Complex geometry, 5-axis machined
Compound angles, deep cavities and multi-face features held in one datum, so true position survives the whole part instead of drifting across setups.
Explore 5-axis machining →CNC milling, 3- and 4-axis
Plates, housings, frames and fixtures up to roughly one metre, with fixture design and process sequencing planned around deformation.
Explore milling services →CNC turning and Swiss-type parts
Shafts, pins and miniature housings with concentricity and runout controlled to ±0.003 mm on parts measured in millimetres.
Explore turning services →Rapid prototyping
Functional prototypes and bridge parts, machined from the same stock and programs that will run production, not a separate process.
Explore rapid prototyping →Hard material machining
Ti-6Al-4V, Inconel 718, 17-4PH, 316LVM and PEEK, with tool wear, heat and distortion managed before they turn into scrap.
Explore titanium machining →Gears and fit-critical assemblies
Mating components machined as controlled sets — shaft-bore fits, parallelism and coaxiality to ±0.005 mm, so assembly works first time.
Explore precision machining →The floor your part actually runs on.
Cutting, turning, finishing and inspection all happen in one building in Dongguan. No job is handed to a partner shop halfway through — the team that reviewed your drawing walks it to the dock.
Talk to the engineer, not a call centre.
Seven people handle quoting, programming, production and inspection. The name on your quote is the person who answers the technical questions behind it.
Same floor, same shift handover — so a change you raise on Monday reaches the machine before the next run, not after it.
Meet the full team →
Engineering · CNC machining · Process optimization

CNC programming · Process development

Production planning · Process control

Project planning · Delivery management
A clearer path from drawing to part.
Bring a finished model, or bring an idea that is not modelled yet. Both routes start with an engineering review instead of a price list.
Start with your CAD file
Send the model, the drawing and the specification together. Tell us material, quantity and finish, and you get a manufacturability report plus a firm price — not a range that changes after tooling.
Develop the part before you cut metal
No model yet? Bring a sketch, a competitor sample or a functional requirement. Our engineers define the interfaces, select the process and prove the design in a prototype before production tooling is committed.
From quote to dock in five controlled steps.
Every step is recorded against your drawing revision, so a change request mid-project is a documented decision rather than a surprise on the invoice.
Review & quote
Manufacturability feedback, tolerance review and a firm price within 24 business hours.
Material & setup
Certified stock, fixture design and CAM programming, logged against the drawing revision.
Machining
3-, 4- and 5-axis milling plus Swiss turning, with in-process gauging on critical features.
Inspection
CMM reports, first-article inspection and material certificates travel with the batch.
Finish & ship
Anodizing, passivation, PVD, DLC and heat treatment in-house, then DDP or FOB delivery.
The grade on your drawing, controlled in one place.
Material sourcing, machining and surface treatment are scheduled as one chain. Cosmetic, corrosion and hardness requirements are settled before the part leaves the shop, not after it arrives.
Mill certificates and traceability records are kept per batch, so a material question two shipments later still has an answer.
Decorative, functional and medical finishes are quoted with the machining operation, so the lead time you see includes the finish.
Built for the sectors that cannot absorb a rework.
Different industries fail in different ways. The inspection plan, the documentation and the finishing route change with the sector, not just the drawing.
Aerospace
AS9100D process control for structural, engine-side and ground-support components, with first-article documentation and full traceability.
Explore aerospace →Automotive
Brackets, housings, sensor mounts and EV thermal parts, from one-off validation builds into repeatable production volumes.
Explore automotive →Medical devices
ISO 13485:2016 controls for 316LVM and titanium instruments, implant tooling and housings, with cleanable surface finishes.
Explore medical →Robotics & automation
End-effector fingers, frames and gearbox parts that need stiffness, low mass and mating fits that assemble without hand work.
Explore robotics →Engineering support, not just machine time.
Most suppliers quote what you send. We tell you what to change first — and then make the part without the second round of fixtures that change would have cost.
DFM before the first chip
Every quote carries a manufacturability review: tolerance stack-ups, tool access, cost drivers and the two or three changes actually worth making.
One setup, fewer stacked errors
Five-axis work keeps compound angles and multi-face features in a single datum, so accuracy does not accumulate across three separate setups.
Inspection you can audit
CMM reports, first-article inspection sheets and material certificates ship with the batch — as the default, not as an extra request.
Consistency from 1 to 5,000
The same CAM program, the same fixture and the same inspection plan follow a part from the prototype run into production.
Machining knowledge, written for the people who buy parts.
Process explainers, material comparisons and shop-floor problems, written by our engineering team — the same reference material we use when reviewing a drawing.
Resource
What Is SFM in Machining?
Surface feet per minute drives tool life, finish and cost. Here is how the number is set, and what happens when it is pushed too far.
Process
The Basics of Plastic Extrusion
How continuous profiles are formed, where the tolerance actually comes from, and when extrusion beats machining for a plastic part.
Materials
Heat-resistant plastics for injection moulding
PEEK, PPS, PEI and PA46 compared on continuous service temperature, dimensional stability and the cost they add per part.
What engineers ask before they send a file.
What files do you need to quote a part?+
Can you machine a single part?+
How fast can I get prototypes?+
What tolerances can you hold?+
Is finishing handled in-house?+
Do you ship delivered duty paid?+
Send a drawing. Get a real number.
Quotes include DFM feedback, so you know what to change before you commit to tooling. Most requests are answered within one business day.